ES9000 - Series Pre-Load Strike

CE_logo.jpg 01_Tricare Registered.jpg

Application

The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper.Pre-load is a common condition that caused by pulling on a door before it unlocks, the weight of warped or drooping doors, seals on fire doors, or by differential air pressure created when heating and cooling systems are in use. 

Standard features include multi voltage10 - 30Vdc and field changeable settings from fail safe to fail secure. 

Built to last, this is a premium locking solution that has been tested in excess of 2 million cycles and boasts unique features like no other available on the market today.

Specification

  • Operates under pre load up to 25kg
  • Easy field selectable fail safe/fail secure
  • Multi voltage 10-30Vdc
  • 1300kg holding force
  • 2.5 million cycles endurance rating
  • Latch keeper is significantly quieter in operation
  • Weather resistant (IP54)
  • Built in protection diode
  • Mounting tabs as standard
  • Non handed
  • Tricare 5 Year Warranty
  • CE marked to EMC Directive

Finish

  • High traffic areas
  • Doors subjected to side load (pre load)
  • Fire rated door sets (Australian Specific)
  • Open in/open out doors
  • Suitable for use with all access control systems

Standards

Voltage 
10 - 30Vdc
Current 
250mA @12Vdc - 130mA @24Vdc
Solenoid Solenoids are rated for continuous use.
Electrical protection
Polarity and back EMF protected
Monitoring
Solenoid Monitor - 1 amp NO/NC microswitch
Door / Latch - 1 amp NO/NC microswitch
Holding Force
1300kg static strength rating
Endurance
1,200,000 cycles endurance rating @ 25kg pre-load
2,500,000 cycles general durability without pre-load conditions
Latching
Suitable for 15mm latch with 3mm door gap
Environment
Operational temperature range -20°C to +60°C
Body
Solid Stainless Steel Construction
Keeper
Stainless Steel
Ordering Options
119001-000
TRIMEC ES9000 PTO/PTL
119001-010
TRIMEC ES9000 PTO/PTL - NO EXTENSION LIP
119001-020
TRIMEC ES9000 PTO/PTL - 8MM EXTENSION LIP
119001-060
TRIMEC ES9000 PTO/PTL - EXTENSION LIP HOLES
220200-505
TRIMEC 25MM EXTENSION LIP FOR ES2000/ES2100/ES9000
220200-506
TRIMEC 50MM EXTENSION LIP FOR ES2000/ES2100/ES9000